FlatKeys

MM1183L

Our new <TOG*>-RETRO devices are a direct plug-in replacement for the originals.  They operate from 5-16v and have a 10kHz-16MHz input clock range; both of which exceed the original specification.

They are made possible by using FPGA (Field Programmable Gate Array) technology which in recent years has become small enough to use in devices of this size.  There is a double stack of PCBs, the top one of which is a 4-layer board.

Unlike our FK50240 top octave synthesiser, the top octave generators only provide the original tuning.

*the “<TOG>” is replaced with a generic part number for devices that had the same pin-out

Our MM5832-RETRO uses pin 7 as the input clock reference and output note reference. This is compatible with Lowrey but for Hammond MDD boards there is a small modification here.

The MM5832-RETRO and MM5833-RETRO are the same device; by changing the position of a single resistor the output notes change to suit. So it is possible to buy two of the same and modify as required. Instructions are provided with the device. Note that the resistor is 0603 size, which is pretty small!

This is available to purchase below.

 

Prices

Prices include standard shipping worldwide. Prices include VAT at the prevailing rate where applicable. All import duties and taxes are the customer's responsibility.

MM5832-RETRO - from £27.00

Select Quantity
About Us | Contact Us | Tel: +44 (0)1723 352347 | ©2017 FlatKeys Ltd