FlatKeys

147196

Most of the devices on our site were requested, so if you need something, feel free to request it!

Our new <TOG*>-RETRO devices are a direct plug-in replacement for the originals.  They operate from 5-16v and have a 10kHz-16MHz input clock range; both of which exceed the original specification.

They are made possible by using FPGA (Field Programmable Gate Array) technology which in recent years has become small enough to use in devices of this size.  There is a double stack of PCBs, the top one of which is a 4-layer board.

Unlike our FK50240 top octave synthesiser, the top octave generators only provide the original tuning.

*the “<TOG>” is replaced with a generic part number for devices that had the same pin-out

As far as we know, the 147196 was used in Wurlitzers, has an input clock of 2MHz and a pinout like the MK50242, but has outputs one octave higher. This is a direct replacement for the 147196 and is available to purchse below.

 

Pins not making contact properly? Could be a socket issue...Click the image for the solution!

 

Prices

Prices include tracked & signed shipping worldwide. All import duties and taxes are the customer's responsibility.

147196-RETRO - from £39.00
Select Quantity
About Us | Contact Us | Privacy Policy | Shipping Information | T&C | Copyright ©1999-2024 FlatKeys Ltd